太阳集团城网站
DongGuan cnauto automation equipment Co Ltd
总监在线
13713306830
news
position:home > news

Medium pressure barrel conforming to international sealing r

writer:点胶阀 time:2020-04-08 17:26 clicks:
The tightness of the pressure barrel is very important, which will affect the delivery effect of glue. The pressure barrel uses the air pressure to deliver glue from the pressure barrel to the point glue valve. Because the air pressure density is less than the glue density, as long as the air pressure value is enough, the glue can be delivered. However, in case of air leakage, the delivery of glue will be unstable. Some low viscosity glues have little impact, and high viscosity glues cannot Transported.
平盖压力桶  
  The pressure buckets produced by our company are basically made in accordance with the international standard requirements. The thickness of the pressure buckets, the thickness of the flat cover, the requirements of the sealing ring and the use of the accessories are made in accordance with the international standard requirements. The pressure buckets produced by our company in China are quite in line with the production requirements, without air leakage. The use effect of the parts is also excellent, and each product is strictly required Self, for the use of manufacturers is also protection.
法兰压力桶  
  Why does the glue storage device use the national standard? The material is 304 stainless steel, and the thickness is strictly required to be the most sufficient? Why? First, life safety, using every product of our company, there will be no personal safety problem. Second, product quality, ensuring quality stability, the manufacturer will like it. Third, our company is a long-term manufacturer, not greedy for a short time and cheap, but cut off its own future. Therefore, the stainless steel pressure barrel produced by our company is completely produced according to the requirements of international standards and has been used for three to five years It's not a problem at all.
活塞式压力桶  
  The flat cover of the pressure barrel is 8mm thick, and the whole material is made of stainless steel 304, which can fully withstand the air pressure within 0.99mpa. In addition, the pressure regulating valve will be installed on the flange pressure barrel to prevent the air pressure from being too high or unstable, so as to ensure the continuous output of the air pressure valve to limit the air pressure. The flat cover of the pressure barrel will be provided with accessory holes for the installation of rubber pipes, silencers, safety valves, ball valves, pressure regulating valves, etc For example, the glue storage device needs to be combined with accessories to meet the use requirements, and there are many types of pressure buckets, including flange pressure buckets, flat cover pressure buckets, clamp pressure buckets, etc., super multi types, and 8 cm pipes are used for rubber pipes.
 
XML 地图 | Sitemap 地图